Finna Breeze Classic Bicycle - Fresh Cupcake

The Finna Breeze Classic Bicycle in Fresh Cupcake is the perfect choice for any cycling enthusiast. This bike is designed with a Finna Full CR-MOLY frame and a Finna 700C CRMO fork for CB, making it both durable and lightweight. The Weinmann 700C wheelset and KT Alloy 32 Holes front hub/Shimano Nexus 3V rear hub provide a smooth and comfortable ride, while the Kenda Kwest 700 x 28C tyres and Kenda Super Lite Tube inner tubes ensure excellent traction and stability on any terrain.

The Promax Chrome brakes, FSA Cartridge 48T bottom bracket, and KMC 96L chain make for a reliable and efficient ride, while the Shimano SL-3S41E shifters allow for easy and precise gear changes. The Kalloy AS-601 stem and HL 25.4 x 560 mm (15º) handlebar provide a comfortable and ergonomic riding position, while the Neco 1-1/8" Threadless headset and Velo Rubber 125 mm bar tape ensure a smooth and comfortable ride.

The Finna Breeze Classic Bicycle in Fresh Cupcake also comes with a Cionlli 6205 saddle, Nuvo NH-B405AP bell, Cat Eye reflectors, and Sunnywheel U-Stay mudguards. Available in XXS (537), XS (551), S (569), and M (590) sizes, this bike weighs 12.9 Kgs and comes with a 2-year warranty. Whether you're commuting to work or exploring new trails, the Finna Breeze Classic Bicycle in Fresh Cupcake is the perfect choice for any cycling adventure.

Finna Cycles was born from the concern of all of us who move around the city on a daily basis, slowly but surely. Those of us who believe that change is possible and who also feel responsible and an important part of making it happen.

Finna Cycles is a line of elegant and comfortable bicycles that will allow you to escape the usual congestion, giving you a high dose of freedom and autonomy. From their geometry to the smallest detail, Finna Cycles bicycles have been designed so that you can regain the feeling of independence, enjoying your day to day without stress, traffic jams or delays.

Finna Cycles bicycles are for everyone. At Finna Cycles we believe in the democratization of this means of transport and, for this reason, we design all our models with a single objective: to improve the quality of life of those who are committed to change.

This city bicycle with gears arrives around 80% assembled in a well-protected box. The most complicated is already assembled from the warehouse and the rest is very easily finished. You will have to install the front wheel, saddle and seat post, adjust the handlebars and place the pedals, though we recommend to have everything assembled by a professional.

When you take the bicycle out of the box remove all the protections and the front wheel that is attached to the frame. Then place the seat post and saddle in their corresponding place on the frame. The next part to place is the bicycle handlebars: tighten the stem screws and place the handlebars in the middle. Install the pedals on the cranks as follows: each pedal is marked with the letters L (left) and R (right) to indicate the side to be mounted. Place them slowly and carefully so as not to damage the thread of the crank arms. And finally place the front wheel in the fork dropouts and tighten the nuts.

You should have no problem with the assembly of the bicycle, it is quite straightforward. But if you are not confident in completing the assembly, we recommend that you take the bike to a nearby shop / bicycle mechanic so that a specialist can complete the assembly, and make sure you can ride the bicycle safely and assembled well for a smooth ride.