Spray.bike Metal Plating - Pewter Silver

Spray.bike Metal Plating Pewter Silver is a high quality spray paint designed for use on bicycle frames. It comes in a convenient 400ml bottle that provides enough paint to cover an entyre frame. The product colour is pewter/silver, which gives a light satin finish that looks great on any bike.

The exceptional quality of this spray paint is due to its high real metal content, which is made up of both aluminium and zinc. This ensures that the paint creates a hard metal layer that is resistant to scratches and chips. However, due to the high metal content, we strongly recommend the use of a mouth and nose mask when using this product.

Another great feature of Spray.bike Metal Plating Pewter Silver is that it can be sprayed directly onto existing paints. This makes it an easy and convenient way to give your bike a fresh new look. If you are applying the paint to a raw metal or carbon surface, we suggest using an appropriate primer spray beforehand.

To protect your new paint job from the weather elements, we recommend using the Frame Builder's Transparent Finish on top. This will ensure that your bike stays looking great for longer. With a drying time of around 2 hours, you can have your bike looking like new in no time.

In conclusion, Spray.bike Metal Plating Pewter Silver is the perfect spray paint for rejuvenating your bicycle frame. Its exceptional quality and high metal content make it an effective and long-lasting solution. So why not give your bike a fresh new look today?

Instructions for use:

• Ensure surface is clean and dry.
• Wear protective gloves, protective clothing, eye/face protection.
• Always paint in an open space in the open air.
• Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%.
• Shake can for at least 3 minutes before use.
• Test spray for 2-3 seconds prior to application.
• Spray distance: at least 20 cm.
• When spraying, keep hand moving at all times.
• Allow to dry (touch dry: 10 minutes, complete cure: 2 hours).
• At end, turn can upside down and spray for 2 seconds before storing.
• Protect can from sunlight and temperatures exceeding 50°C/122°F.

LINK 1: Spray.Bike, special sprays for painting your bike

LINK 2: Tips and tricks: painting your bike with Spray.Bike

Spray.Bike is a collaboration between three different companies: Brick Lane Bikes – a major international manufacturer, retailer and wholesaler in the bike industry, based in London. Vicious Cycles Athens – an urban bike workshop in the centre of Athens, Greece. Cosmos Lac – a high-tech paint manufacturer based in Greece.

Spray.Bike was created out of frustration with existing products. if you’re not an experienced pro, metal or car spray paint is so utterly difficult to use on bikes. At VCA, while trying to repair a damaged frame using a standard RAL spray, we were so disappointed with the results that we phoned up the manufacturer, which happened to be Cosmos Lac. “Well what do you want the paint to do?” was the reply. After 2 years of development, Spray.Bike is the answer.

VCA and Cosmos Lac sent samples over to Brick Lane Bikes in London for their highly trusted opinion. From the moment they tried it, they wanted to be part of the excitement too.