Spray.bike Carbon Primer

The Spray.bike Carbon Primer is a must-have for any cyclist looking to customize their raw carbon fiber or resin composite bicycle frameset. This clear primer provides a strong adhesion for Spray.Bike paints, ensuring a long-lasting and professional finish.

Before using the primer, it is important to ensure that the surface is clean and dry. Additionally, it is recommended to wear protective gloves, clothing, and eye/face protection when using the product. The optimal temperature for spraying is between 20-25°C, and it is important to avoid using Spray.Bike if the temperature is below 10°C or above 35°C, or if the relative humidity is above 75%.

When using the Spray.bike Carbon Primer, it is important to shake the can for at least 3 minutes before use and to test spray for 2-3 seconds prior to application. The spray distance should be at least 20 cm, and it is important to keep the hand moving at all times when spraying. The primer should be allowed to dry for at least 10 minutes before applying any additional coats or paints.

Overall, the Spray.bike Carbon Primer is an essential product for any cyclist looking to customize their bike. However, due to transport restrictions, it is important to note that we are unable to send Spray.Bike products to countries outside the European Union, or to Norway, Switzerland, Malta, or Iceland.

Spray.Bike is a collaboration between three different companies: Brick Lane Bikes – a major international manufacturer, retailer and wholesaler in the bike industry, based in London. Vicious Cycles Athens – an urban bike workshop in the centre of Athens, Greece. Cosmos Lac – a high-tech paint manufacturer based in Greece.

Spray.Bike was created out of frustration with existing products. if you’re not an experienced pro, metal or car spray paint is so utterly difficult to use on bikes. At VCA, while trying to repair a damaged frame using a standard RAL spray, we were so disappointed with the results that we phoned up the manufacturer, which happened to be Cosmos Lac. “Well what do you want the paint to do?” was the reply. After 2 years of development, Spray.Bike is the answer.

VCA and Cosmos Lac sent samples over to Brick Lane Bikes in London for their highly trusted opinion. From the moment they tried it, they wanted to be part of the excitement too.