Spray.bike Smoothing Putty

The Spray.bike Smoothing Putty is a must-have for any cyclist looking to restore their bike's frame to its former glory. This 400ml can of thick cover-all putty is perfect for covering minor blemishes, including scratches, rust damage, and stickers. It's easily sanded down, leaving a smooth and even surface.

Before using the Spray.bike Smoothing Putty, it's important to ensure that the surface is clean and dry. Protective gloves, clothing, and eye/face protection should be worn, and the product should always be used in an open space in the open air. The optimal temperature for spraying is between 20-25°C, and the product should not be used if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%.

To use the Spray.bike Smoothing Putty, shake the can for at least 3 minutes before use and test spray for 2-3 seconds prior to application. Spray the surface from a distance of at least 20 cm, keeping your hand moving at all times. Allow to dry before adding a second coat, with touch dry time being 10 minutes and complete cure time being 2 hours. Finally, turn the can upside down and spray for 2 seconds before storing, and protect the can from sunlight and temperatures exceeding 50°C/122°F.

Please note that due to transport restrictions, we are unable to send Spray.Bike products to countries outside the European Union, or to Norway, Switzerland, Malta, or Iceland.

Spray.Bike is a collaboration between three different companies: Brick Lane Bikes – a major international manufacturer, retailer and wholesaler in the bike industry, based in London. Vicious Cycles Athens – an urban bike workshop in the centre of Athens, Greece. Cosmos Lac – a high-tech paint manufacturer based in Greece.

Spray.Bike was created out of frustration with existing products. if you’re not an experienced pro, metal or car spray paint is so utterly difficult to use on bikes. At VCA, while trying to repair a damaged frame using a standard RAL spray, we were so disappointed with the results that we phoned up the manufacturer, which happened to be Cosmos Lac. “Well what do you want the paint to do?” was the reply. After 2 years of development, Spray.Bike is the answer.

VCA and Cosmos Lac sent samples over to Brick Lane Bikes in London for their highly trusted opinion. From the moment they tried it, they wanted to be part of the excitement too.